Windesign Trapeze Harness
MIRA Comfort Harness. Allround harness with eight points spreader bar fixation,
comfortable and adjustable leg straps, stainless steel tube spreader bar,
adjustable back padding and tough-tech reinforced seat.
- Full back support
- Eight points spreader bar fixation
- Comfortable and adjustable leg straps
- Adjustable shoulder strap release system
- Neoprene covered stainless steel buckles
- PVC coated 600D polyester shell
- Stainless steel spreader bar
- Heavy-duty rear
EX2560 - available sizes: M, L, XL, XXL
Make your own 4:1 mainsheet block-ring combi
This year we introduced the 38mm Windesign low friction ring. Low friction rings can be used
in various applications. The 38mm ring is mainly intended to create a 4:1 mainsheet system.
Similar to our existing block combination, the EX1319, you can replace the 29mm Harken block
by the 38mm Windesign ring. By changing this block, you create a low friction, less heavy and
more durable block combination.
It's easy to create the block combination as shown below yourself.
What you need to make the 4:1 mainsheet block-ring combination:
- EX1314 - Harken 40mm block on Vectran line with a safety snap shackle
- EX1322 - Windesign 38mm low friction ring
- EX13672 - A bit of 2.2mm Vectran line
We have expanded our Windesign sailing gear range with a sunvisor.
The performance mesh fabric and a plastic reinforced pre-curved peak
ensures minimal water absorption. With an adjustable hook/loop closure
and a comfortable 3-layer cotton sweatband, it's a perfect protection
against the sun for eye and head and ideal for all dinghy sailors.
Now available in black and cyan:
EX2581B - Windesign Visor, black
EX2581C - Windesign Visor, cyan