Optimist - Spar fittings
Optiparts supplies all Optimist spar fittings you need for your Optimist school spars and Optimist racing spars. From hook-in blocks to end fittings, every part has been designed with great care.
This mast sleeve is fitted around the mast at deck level and protects the m..
Clip for wind indicators with a 5mm shaft...
Low friction Delrin Optimist heel plug for racing mast..
High heel plug, low friction Delrin for racing mast..
Heavy duty mast heel plug for the Silver and School Optimist masts...
Top cap, to seal the top of a Silver and School mast...
Optimist sprit ends for 25mm Standard sprit. Per pair...
Optimist sprit ends for 27mm racing sprits. Per pair...
Optimist sprit ends for 29mm racing sprits. Per pair...
Inboard end for 32mm standard boom (for EX1030). Optiparts owns several mou..
Outboard end for 32mm standard Optimist boom. Optiparts owns several moulds..
Inboard boom end for 40mm Optimist racing boom. Optiparts owns several moul..
Inboard boom end for 55mm Optimist racing boom. Optiparts owns several moul..
Outboard end for 40mm racing boom (EX940). Optiparts owns several moulds fo..
Outboard end for 55mm racing boom (EX955).Optiparts owns several moulds for..
Inboard end for 45mm racing boom (for EX945). Optiparts owns several moulds..
Outboard end for 45 racing boom (for EX945). Optiparts owns several moulds ..
Mast flotation plugs, made of natural cork. Set of 3...
Lacing lines for Optimist mast and boom, all in Vectran. Five 2.2 mm Optimi..
Replacement pin stop as used on the Blackgold mast for Optimist. Provides m..
Button used for the Optimist downhaul on the Optiparts school booms...
Pins stop for Optimist spars as used on the Silver and School spars from Op..
Boom button for the Silver and School booms from Optiparts...
Optiparts top pins for Optimist mast, which do not cut the lines, as suppli..
Optiparts aluminium top pins for Optimist mast, strong and long lasting. Go..
Lacing eye bridge as used on the Blackgold boom from Optiparts..
This plain bearing aluminium sheave block is perfect to use on the Silver O..
Plain bearing Optimist halyard as used on the Silver spars from Optiparts. ..
T2 soft-attach block 29mm from Harken as used on Blackgold mast halyards...
Optimist Halyard system with Windesign low friction ring. This halyard syst..
Replacement Optimist halyard line with low friction ring spliced on...
Hook-in block, ball bearing as used on the Optimist Blackgold racin..
Optimist halyard system as used on Blackgold Optimist masts. 3 mm ultra low..
Replacement halyard line for Optimist sprit. 3mm Vectran halyard with 2 spl..
Nylon sprit adjuster handle for the Optimist. For easier handling of the ha..
Sprit protection for both 27 and 25 mm Optimist sprits. Heat shrinkable tub..
Gold trim strip for Optimist. Text printed on transparent polyester. Length..
Red trim strip for Optimist. Text printed on transparent polyester. Length ..
Optimist rigging pack as with Optiparts SILVER set.
Contains: halyard EX13..
Boom bridle for Optimist, 3 mm Vectran with stainless steel ring for mainsh..
15mm stainless steel ring for Optimist mainsheet. As used on an Optimist bo..
Optimist vang for all racing booms from Optiparts. ..
Small stainless steel safety snap shackle for the Optimist mainsheet. Lengt..
Stainless steel 316 trigger snap safety shackle for the Optimist. Can be op..
Protest flag. Little pouch with a cord at the top to tie it to the boom and..
Hard anodized aluminium clamcleat for downhaul on the Optimist Blackgold ma..
Clamcleat CL211 MK2 cleat for Optimist downhaul and halyard on GOLD and SIL..
Optimist clamcleat with becket for Optimist halyard on Blackgold mast...
Stainless steel v-cleat for Optimist School masts and booms...
Blue nylon v-cleat for Silver and School Optimist booms...
Grey nylon v-cleat for the Optimist Blackgold booms...
Rigging pack as with BLACKGOLD masts contains:
EX1348 - Halyard system w..
Showing 1 to 54 of 54 (1 Pages)