We improved our trolleys!
From now we provide all our trolleys with the EX10797 – Stainless steel 25 mm axles. These are much more durable than the aluminium axles which we have used before. These axles have extremely good wear resistance characteristics against sand and salt.
EX10798 – Stainless steel locking pins
The new axles come with new stainless steel locking pins. A much more durable one-piece constructed 8 mm pin. Please note that the old alumimium / stainless steel pins and axles have a pin and hole diameter of 5 mm. You will need to drill the hole up to 8 mm in case you would like to replace the locking pin only.
EX10784 – Black solid rubber wheels
The solid rubber wheels now come in completely black color (before red) to provide better UV protection. These wheels have a diameter of 28 cm, are 10 cm wide, do not float and you will never have a flat tyre again. The EX1075 Optimist trolleys are supplied with these wheels and can also be used on all other Optiparts trolleys.
EX1076B – Trolley with belt and large Optiflex-lite wheels – NEW!
A new trolley in our collection! Same design as our regular aluminium trolley, now available with belt. Your Optimist slides easy from the belt when launching. Also available with black solid rubber wheels (EX1075B).
We designed a highly visible yellow sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races. This highly visible yellow training mark is designed to last long. The mark consists of 3 separate parts: a solid outer, an inflatable inner bladder and a ballast bag. The mark can be used anchored or as drifting mark. At the bottom you will find a big grab handle where you can easily fasten the mooring line.
The outer is made of thick 0.9 mm heavy duty fabric. On the top of the solid outer you will find an opening to insert the inflatable bladder. The opening has a velcro/buckle closure. On the side of the outer you will find two grab handles to make it easy to carry and to reposition the mark.
Inflatable inner bladder
The inflatable bladder is made of polyurethane coated nylon and has a twist lock tube valve for quick inflation and deflation.
The mark has an internal ballast compartment to contain the separate ballast bag. The ballast compartment can be accessed through a velcro closure. The ballast bag has an easy to use lock buckle and can be filled with chain or stones.
This training mark features a pocket for an optional strengthening batten (not included).
With these specifications we made a sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races.
Size inflated: 180 x 18 cm
– Highly visible
– Heavy duty 0.9 mm fabric
– Opening for inner bladder with velcro and buckle closure
– Inner bladder with twist lock tube valve
– Pocket for an optional strengthening batten (not included)
– Two grab handles on the side
– Ballast compartment with velcro closure for ballast bag
– Big grab handle for mooring line
Recently we have updated our Windesign tillers and extensions which are now branded with our new Windesign logo.
652850 – Carbon tiller for Laser®
The low profile of this carbon Laser tiller, in combination with the high stiffness and low weight creates an amazing light feeling when steering the boat. With anti-chafe plate. With its weight less than 300 grams the Windesign Laser tiller is the lightest of them all. This carbon tiller is supplied with a mounting plate which is suitable for all Windesign tiller extensions.
652112 – 20mm Carbon tiller extension
Ultra stiff, lightweight carbon tiller extension. Weighs only 160 grams. Supplied with rubber joint with rope core, releasable base with pin and tubing and 100cm long hi-tech X-grip. Tube diameter: 20mm. Length: 120cm. Also available in 190 cm as Contender tiller extension and 250 cm as 49er tiller extension and 49erFX tiller extension.
652312 – 16mm Deluxe aluminium tiller extension
Made of black anodized 16 mm aluminium tube. The aluminium tiller extensions are fitted with a releasable rubber joint / swivel and an eva foam grip. The releasable rubber joint / swivel has a rope core and is mounted with an aluminium pin only. The pin is kept in place by a piece of heat-shrinkable tubing for easy replacement. With the available lengths from 60 to 120 cm, the popular 16mm Deluxe tiller extensions from Windesign are suitable for almost all dinghies.
652900/30 – Deluxe/Standard aluminium tiller for Laser®
Windesign manufactures a 32 mm aluminium Laser® tiller. The tiller has at the outer end a precise molded anodized aluminium insert. The inner end is sealed with a plastic cap. The tiller comes in a Deluxe and a Standard version. The Deluxe version is 25 microns black anodized and has a stainless steel anti-chafe protecting plate for the traveller line. An aluminium clamcleat for the rudderblade line is mounted on the side of the tube. The Laser tiller is also available with an aluminium Deluxe tiller extension 652910. The Standard tiller is silver anodized and has no chafe plate and no cleat.
When you bring your boat to a regatta, training, holiday or somewhere else, it’s important to be well prepared before leaving. If you have an Optimist, Laser or other dinghy and transport it on your roof or on a trailer; the tips and tricks below are usefull for all.
Padded roof rack cover
When you transport your boat on the roof of your car, it’s usefull to protect your roof rack against damaging your boat. Padded roof rack covers are available to protect your boat and give more grip in fastening your boat on the roof rack. The Optiparts padded roof rack protectors have a foam inner and are covered with heavy duty nylon cloth with velcro fastener. Easy to apply and to be placed in the right position. Length 50 cm. Sold per piece.
Load straps for roof rack and trailer
To secure your dinghy to your trailer or roof rack, we advise to use long and durable load straps. To protect your hull against damaging, the Optiparts load straps have protection behind the buckle and are 6 meter long; long enough to put twice over your boat.
During transport we advise to use a hull cover to protect your hull against chippings from the road. Nothing worse than arriving at a regatta and have damage to repair. The top quality hull covers from Optiparts and Windesign for Optimist and Laser are made of Moistureguard 2000; a heavy duty 900D breathable polyester cloth with a polyurethane membrane. Moistureguard reduces the risk of blisters. The hull covers are easy to install with the supplied straps and adjustable buckles.
We all know that it’s easy to damage your Optimist and Laser foils. To protect your foils against having chips on the edges it’s recommended to use a foil bag for your rudder and daggerboard. The Optiparts and Windesign foil bags for Optimist and Laser have seperate compartments for rudder, daggerboard, tiller and accessories like sheet, battens and wind indicator. Carried out with velcro closure, carrying handle and supplied with adjustable and detachable carrying strap.
Rig Support for Laser®
Don’t struggle anymore with fitting your spars in your car. With the Windesign Rig Support for Laser® you can easily take your Laser boom, top and bottom mast without damaging the deck during transport. The high grade plastic molded rig support comes in two pieces; the front piece fits in the masthole and the back piece fits between the deck. The Laser spars are fixed to the support with shockcord. In addition to the transport benefit, this rig support offers another benefit when storing your Laser; when placing your top cover over the rig support, your cover will stay upwards and the water will run off.