We designed a highly visible yellow sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races. This highly visible yellow training mark is designed to last long. The mark consists of 3 separate parts: a solid outer, an inflatable inner bladder and a ballast bag. The mark can be used anchored or as drifting mark. At the bottom you will find a big grab handle where you can easily fasten the mooring line.
The outer is made of thick 0.9 mm heavy duty fabric. On the top of the solid outer you will find an opening to insert the inflatable bladder. The opening has a velcro/buckle closure. On the side of the outer you will find two grab handles to make it easy to carry and to reposition the mark.
Inflatable inner bladder
The inflatable bladder is made of polyurethane coated nylon and has a twist lock tube valve for quick inflation and deflation.
The mark has an internal ballast compartment to contain the separate ballast bag. The ballast compartment can be accessed through a velcro closure. The ballast bag has an easy to use lock buckle and can be filled with chain or stones.
This training mark features a pocket for an optional strengthening batten (not included).
With these specifications we made a sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races.
Size inflated: 180 x 18 cm
– Highly visible
– Heavy duty 0.9 mm fabric
– Opening for inner bladder with velcro and buckle closure
– Inner bladder with twist lock tube valve
– Pocket for an optional strengthening batten (not included)
– Two grab handles on the side
– Ballast compartment with velcro closure for ballast bag
– Big grab handle for mooring line
Whether you are an experienced Optimist sailor or you just start racing the Optimist, it could be hard to choose which type of Optimist spars are most suitable for you. You learnt sailing the Optimist with school spars and now it’s time to make the next step. When starting the search you will immediately recognize a visible difference between school and racing spars. An Optimist racing mast is fitted out with a halyard hook-in block and a wind indicator which is fixed by using top pins. Besides the visible aspects, the main difference is the use of material. Blackgold racing spars are made of high quality 7075 hard anodized black Aluminium, which makes them more durable and stiffer than school spars which are made of more ‘standard’ Aluminium.
Now you know where Optimist Blackgold spars are made of, it’s time to choose the right configuration; you might noticed that several different types of masts, booms and sprits are available. We explain the difference.
The Blackgold collection contains two types of Optimist spars. The regular BLACKGOLD™ mast which is suitable for sailors above 40 kg and the 25% lighter BLACKLITE™ mast which is the best proven solution for sailors under 40 kg and allows sailors to depower the rig in heavy winds. Both are 45 microns black hard anodized 7075 masts and come with high grade nylon fittings, hard anodized cleats and complete rigging pack.
Three types of Optimist booms are available. All BLACKGOLD™ booms are made of high grade, black anodized tube, fitted with captive eye straps, black nylon in- and outboard end fittings, nylon outhaul cleat, 4 mm Vectran outhaul, 3 mm pure Vectran bridle and vang and a fitted outhaul trim gauge.
BLACKGOLD™ MEDIUM – A stiff 40 mm lightweight Optimist boom which is suitable for the majority of Optimist sailors.
BLACKGOLD™ POWER – A stiffer 45 mm Optimist boom to keep more tension on the leech for the heavier Optimist sailor. The smaller bridle gives more space when tacking.
BLACKMAX™ – This ultra stiff and yet lightweight 55 mm Optimist boom can be used without a bridle. This enables the larger Optimist sailor to land further forward when tacking.
We offer a choice of three black anodized 7075 Optimist sprits. All with black end fittings and sprit chafe guard. The 26,6 mm BLACKLITE sprit is 20% more flexible and a lot lighter than the 27 mm BLACKGOLD sprit. The 29 mm BLACKMAX sprit is 19% stiffer than the 27 mm BLACKGOLD sprit and recommended for Optimist sailors above 45 kg.
The combination of the different types of masts, booms and sprits creates the Blackgold spar sets, which are suitable for most sailors. Please note that Optimist sailors sometimes choose a personal configuration, like a thinner sprit or thicker boom. This could depends on the sailors style and is mostly advised by a coach.
Silver Regatta Spars
Besides Blackgold racing spars there is a more affordable racing spar set available for the Optimist, known as the Silver Regatta Spars. It’s built according to the I.O.D.A. Class rules and the price is comparable to the school spars. The Silver regatta spars are less stiff than Blackgold spars and ideal for lightweight Optimist sailors who just started racing. The Silver mast, boom and sprit are made of high quality aluminium tube, fitted with aluminium halyard and downhaul Clamcleats. The lightweight 40 mm silver boom is much stiffer than the 32 mm school boom and will allow the sailor to put more tension on the leech. The Silver sprit has 15 cm anti chafe protection tubing. Both mast and set come with rigging pack, containing all necessary lines, wind indicator, top pins and halyard with hook-in block.
It’s time to prepare yourself and your Optimist for the new sailing season. Signs of wear and tear will show on several places which might need some extra attention. The most common bits and peaces which need to be checked or replaced are shown below. Good luck with all your season preparations! If you need any assistance, please contact your local Optiparts dealer.
Check your ratchet!
Does your ratchet block still run smoothly and is the ratchet function still working? Clean your block by removing dirt and salt or if necessary replace your block. We recommend a block with 57mm sheave and ratchet on/off switch.
Choose a rubber stand-up!
A rubber stand-up keeps your block from hitting the deck without snagging lines and it won’t hurt your toes. This flexible 40 mm version is suitable to mount under ratchet blocks. Check our manual for installation step by step.
Replace your sleeve and collar!
A mast sleeve is fitted around the mast at deck level and protects the mast from wearing. If the sleeve is worn out, it’s time to replace the sleeve. Check our manual for the right position and how to mount.
Splice new lines!
The lines on an Optimist are being used intense and has to be checked carefully. Your sprit halyard, vang and bridle are recommended to replace in time. We recommend to use our Dyneema minireel, together with our stainless steel splicing needle for easy splicing.
Don’t lose your extension!
You do not want to break the rubber joint during a training or regatta! Replace your tiller extension rubber joint in advance. We advise a rubber joint with fibre core. The fibre core will avoid complete failure when the rubber tears. Mounted with a pin which is kept in place by a piece of heat shrinkable tubing.
Keep your daggerboard in place!
Shockcord stretches out over time. Check your daggerboard bungy and replace if necessary. Optiparts supplies a complete set with two sizes of tubing, shockcord and 3 mm Vectran rope to keep the shockcord in place and your hiking strap up too. Check our manual for installation step by step.
Create your team outfit!
Windesign tanktops are perfect for teams and visibility on the water. These lycra tanktops are ideal for wearing over your buoyancy aids and harnesses to make sure you are streamlined with no annoying dangly bits. Highly flexible, with flatlock stitch technology. Four colors available in junior size. White also availabile in adult size.
Recently we have updated our Windesign tillers and extensions which are now branded with our new Windesign logo.
652850 – Carbon tiller for Laser®
The low profile of this carbon Laser tiller, in combination with the high stiffness and low weight creates an amazing light feeling when steering the boat. With anti-chafe plate. With its weight less than 300 grams the Windesign Laser tiller is the lightest of them all. This carbon tiller is supplied with a mounting plate which is suitable for all Windesign tiller extensions.
652112 – 20mm Carbon tiller extension
Ultra stiff, lightweight carbon tiller extension. Weighs only 160 grams. Supplied with rubber joint with rope core, releasable base with pin and tubing and 100cm long hi-tech X-grip. Tube diameter: 20mm. Length: 120cm. Also available in 190 cm as Contender tiller extension and 250 cm as 49er tiller extension and 49erFX tiller extension.
652312 – 16mm Deluxe aluminium tiller extension
Made of black anodized 16 mm aluminium tube. The aluminium tiller extensions are fitted with a releasable rubber joint / swivel and an eva foam grip. The releasable rubber joint / swivel has a rope core and is mounted with an aluminium pin only. The pin is kept in place by a piece of heat-shrinkable tubing for easy replacement. With the available lengths from 60 to 120 cm, the popular 16mm Deluxe tiller extensions from Windesign are suitable for almost all dinghies.
652900/30 – Deluxe/Standard aluminium tiller for Laser®
Windesign manufactures a 32 mm aluminium Laser® tiller. The tiller has at the outer end a precise molded anodized aluminium insert. The inner end is sealed with a plastic cap. The tiller comes in a Deluxe and a Standard version. The Deluxe version is 25 microns black anodized and has a stainless steel anti-chafe protecting plate for the traveller line. An aluminium clamcleat for the rudderblade line is mounted on the side of the tube. The Laser tiller is also available with an aluminium Deluxe tiller extension 652910. The Standard tiller is silver anodized and has no chafe plate and no cleat.