652800 – Barre Carbone PRO T800 pour ILCA® Windesign Sailing

UGS : 652800 Catégories : , Étiquettes : , , , , , ,


Windesign has developed a high-end extremely stiff racing tiller made of T800 carbon which fits perfect on your Laser® or ILCA®. We are using different wall thicknesses on the inside of the tiller to achieve an ultimate stiffness/weight ratio, we have used the best, stiffest and lightest carbon fibres available, made a recess on top for the stainless steel wear plate and designed two different tiller end castings to achieve the lowest traveler settings for both. This combination of features creates an amazing light feeling when steering the boat. The design went through all different kinds of tests and is believed to be the stiffest, strongest and most lightweight on the market right now! Glossy finish, fitted with an aluminium Clamcleat, only 13,5 mm thick and 26,7 mm wide, a total weight of only 335 gram and supplied with releasable joint to attach your existing tiller extension.

– Designed to be ultimate low under the traveler
– Made of high-end extreme stiff T800 carbon fibres
– Smart design to be a lightweight tiller
– End casting set is available for replacement in case of excessive wear

This product is compatible with Laser® or ILCA® but is not an original Laser® or ILCA® product.
Laser® is a registered trademark owned by Velum Limited. ILCA® is a registered trademark owned by Laser Class Association Inc.

Vous aimerez peut-être aussi…