The season has started for schools and clubs. All schools, clubs and sailors are well prepared, but there is always something to improve. At Optiparts we have several useful products which will make the season even better. From boat parts and accessories to playing cards for using ashore. Find below some useful products. Enjoy sailing this summer!
Take care of your hull!
It’s easy to damage the bow of your Optimist. Especially polyester Optimists are vulnerable and need immediate attention in case of damage. By protecting the bow you will have way less repair work during the season. The EX1065 – Optimist Bow Bumper has a snug fit around the bow of the Optimist. In addition to the bow bumper we advise to add the EX1066 – Optimist Corner Protectors. These heavy duty rubber corner protectors for the Optimist have self adhesive backing and can be used on bow only and on all 4 corners.
Choose the right lines!
It’s very important to have a floating painter line in each boat and have some spare ones as well. The EX1374 – Optimist floating painter is 8,1 meter long and has a diameter of 6mm, with UV treatment. A mainsheet has to be comfortable and durable. The affordable EX1377 – Optimist Mainsheet has a length of 6 meter and is ideal for 1:3 mainsheet systems. This 8mm 16 plait polypropylene sheet is comfortable for all sailors.
Sailing is all about having fun. Optiparts created an easy to handle sail which is half the size of a normal Optimist sail. With the EX1064 – Optimist Trisail now even the smallest helmsman can continue sailing in heavy wind. And have you seen our EX1061WR – Sleeve sail with reef eye? Find out more!
Protect your valuables!
Keep your lunch and valuables safe and dry in your own boat or in the coach boat. With a hole in the lid to secure in the boat with a line. Our lunch containers are available in two sizes: EX3048 – 3 liter, 17 cm high and EX3049 – 6 liter, 26 cm high. Do you prefer using a dry bag? Check out our waterproof sailing bags!
We designed a highly visible yellow sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races. This highly visible yellow training mark is designed to last long. The mark consists of 3 separate parts: a solid outer, an inflatable inner bladder and a ballast bag. The mark can be used anchored or as drifting mark. At the bottom you will find a big grab handle where you can easily fasten the mooring line.
The outer is made of thick 0.9 mm heavy duty fabric. On the top of the solid outer you will find an opening to insert the inflatable bladder. The opening has a velcro/buckle closure. On the side of the outer you will find two grab handles to make it easy to carry and to reposition the mark.
Inflatable inner bladder
The inflatable bladder is made of polyurethane coated nylon and has a twist lock tube valve for quick inflation and deflation.
The mark has an internal ballast compartment to contain the separate ballast bag. The ballast compartment can be accessed through a velcro closure. The ballast bag has an easy to use lock buckle and can be filled with chain or stones.
This training mark features a pocket for an optional strengthening batten (not included).
With these specifications we made a sailing buoy that can be easily used as training mark, by coaches or sailing schools, or as regatta mark during races.
Size inflated: 180 x 18 cm
– Highly visible
– Heavy duty 0.9 mm fabric
– Opening for inner bladder with velcro and buckle closure
– Inner bladder with twist lock tube valve
– Pocket for an optional strengthening batten (not included)
– Two grab handles on the side
– Ballast compartment with velcro closure for ballast bag
– Big grab handle for mooring line
Whether you are an experienced Optimist sailor or you just start racing the Optimist, it could be hard to choose which type of Optimist spars are most suitable for you. You learnt sailing the Optimist with school spars and now it’s time to make the next step. When starting the search you will immediately recognize a visible difference between school and racing spars. An Optimist racing mast is fitted out with a halyard hook-in block and a wind indicator which is fixed by using top pins. Besides the visible aspects, the main difference is the use of material. Blackgold racing spars are made of high quality 7075 hard anodized black Aluminium, which makes them more durable and stiffer than school spars which are made of more ‘standard’ Aluminium.
Now you know where Optimist Blackgold spars are made of, it’s time to choose the right configuration; you might noticed that several different types of masts, booms and sprits are available. We explain the difference.
The Blackgold collection contains three types of spars. The regular BLACKGOLD Power mast which is suitable for sailors above 45 kg, the 12% more flexible BLACKGOLD Medium mast and the most flexible BLACKGOLD Lite mast which is 20% more flexible compared to the BLACKGOLD Power. All three are 45 microns black hard anodized 7075 masts and come with high grade nylon fittings, hard anodized cleats and a complete rigging pack.
Three types of Optimist booms are available. All BLACKGOLD™ booms are made of high grade, black anodized tube, fitted with captive eye straps, black nylon in- and outboard end fittings, nylon outhaul cleat, 4 mm Vectran outhaul, 3 mm pure Vectran bridle and vang and a fitted outhaul trim gauge.
BLACKGOLD™ MEDIUM – A stiff 40 mm lightweight Optimist boom which is suitable for the majority of Optimist sailors.
BLACKGOLD™ POWER – A stiffer 45 mm Optimist boom to keep more tension on the leech for the heavier Optimist sailor. The smaller bridle gives more space when tacking.
BLACKMAX™ – This ultra stiff and yet lightweight 55 mm Optimist boom can be used without a bridle. This enables the larger Optimist sailor to land further forward when tacking.
We offer a choice of two black anodized 7075 Optimist sprits. All with black end fittings and sprit chafe guard. The 26,6 mm BLACKLITE sprit is 20% more flexible and a lot lighter than the 27 mm BLACKGOLD sprit.
The combination of the different types of masts, booms and sprits creates the Blackgold spar sets, which are suitable for most sailors. Please note that Optimist sailors sometimes choose a personal configuration, like a thinner sprit or thicker boom. This could depends on the sailors style and is mostly advised by a coach.
Silver Regatta Spars
Besides Blackgold racing spars there is a more affordable racing spar set available for the Optimist, known as the Silver Regatta Spars. It’s built according to the I.O.D.A. Class rules and the price is comparable to the school spars. The Silver regatta spars are less stiff than Blackgold spars and ideal for lightweight Optimist sailors who just started racing. The Silver mast, boom and sprit are made of high quality aluminium tube, fitted with aluminium halyard and downhaul Clamcleats. The lightweight 40 mm silver boom is much stiffer than the 32 mm school boom and will allow the sailor to put more tension on the leech. The Silver sprit has 15 cm anti chafe protection tubing. Both mast and set come with rigging pack, containing all necessary lines, wind indicator, top pins and halyard with hook-in block.
It’s time to prepare yourself and your Optimist for the new sailing season. Signs of wear and tear will show on several places which might need some extra attention. The most common bits and peaces which need to be checked or replaced are shown below. Good luck with all your season preparations! If you need any assistance, please contact your local Optiparts dealer.
Check your ratchet!
Does your ratchet block still run smoothly and is the ratchet function still working? Clean your block by removing dirt and salt or if necessary replace your block. We recommend a block with 57mm sheave and ratchet on/off switch.
Choose a rubber stand-up!
A rubber stand-up keeps your block from hitting the deck without snagging lines and it won’t hurt your toes. This flexible 40 mm version is suitable to mount under ratchet blocks. Check our manual for installation step by step.
Replace your sleeve and collar!
A mast sleeve is fitted around the mast at deck level and protects the mast from wearing. If the sleeve is worn out, it’s time to replace the sleeve. Check our manual for the right position and how to mount.
Splice new lines!
The lines on an Optimist are being used intense and has to be checked carefully. Your sprit halyard, vang and bridle are recommended to replace in time. We recommend to use our Dyneema minireel, together with our stainless steel splicing needle for easy splicing.
Don’t lose your extension!
You do not want to break the rubber joint during a training or regatta! Replace your tiller extension rubber joint in advance. We advise a rubber joint with fibre core. The fibre core will avoid complete failure when the rubber tears. Mounted with a pin which is kept in place by a piece of heat shrinkable tubing.
Keep your daggerboard in place!
Shockcord stretches out over time. Check your daggerboard bungy and replace if necessary. Optiparts supplies a complete set with two sizes of tubing, shockcord and 3 mm Vectran rope to keep the shockcord in place and your hiking strap up too. Check our manual for installation step by step.
Create your team outfit!
Windesign tanktops are perfect for teams and visibility on the water. These lycra tanktops are ideal for wearing over your buoyancy aids and harnesses to make sure you are streamlined with no annoying dangly bits. Highly flexible, with flatlock stitch technology. Four colors available in junior and adult size.